2610D Compression Specs

How Much Oil, What Type Oil, etc

Moderator: Aaron

Volunteer Poster
Posts: 26
Joined: Mon Jul 18, 2016 1:04 pm

2610D Compression Specs

Postby Dave2610D » Mon Sep 27, 2021 3:45 pm

We assume our 2610D dates to 1985'ish and would like to know when is the time to pull the injectors and clean them. How would I know "if" I need to remove and or replace them? Thanks

Site Administrator
Posts: 3767
Joined: Thu Jul 26, 2007 12:39 pm
Location: Iowa Park, TX

Re: 2610D Compression Specs

Postby Aaron » Fri Oct 08, 2021 12:00 pm

They shouldn't really ever need cleaned unless you have contaminated fuel. If an injector is partially clogged or dirty it will usually cause the engine to make smoke that smells like unburned diesel (because the fuel being injected is more of a stream than a fine mist that is easy to burn).

You can test the injector by following the instructions below
https://www.hoyetractor.com/support/kno ... article=67

Return to “Specs, Capacities, Other”

Who is online

Users browsing this forum: No registered users and 2 guests