YANMAR 3 POINT KIT INSTALL
INTERVAL - NEW
TIME REQUIRED - 10-30 MINUTES
A Three point system allows you to attach a variety of implements or tools to your tractor. The design got its name because of the 3 attacment points to your tractor as shown in the image. This design allows the implement to raise and lower while remaining level.
While the basic design is the same on all Yanmar tractors, the details vary. Below are the common components that will make up a 3 point system.
Your system may inlude bars instead of sway chains and may require additional parts such as top link brackets (the place where the top link attaches to the tractor) or lower links (place where the lift arms attach to the tractor). Those parts can be ordered seperately or as three point kits from one of our sponsors. There really is not muct to the installation, as shown in the image below. All of the parts
are pretty self explanitory on most systems. The adjustable side link can go on either side. The sway chains bolt into the lower lift arms on one end and the brackets beside the opposite arm on the other side.
BE SURE TO CHECK OUT OUR SPONSORS FOR LOADERS, TRACTORS, ETC. CLICK HERE.