Trans/clutch issues

Post your questions or problems you are haviing with your Yanmar tractor here.

Moderator: Aaron

Hdmike444
Volunteer Poster
Posts: 11
Joined: Thu Jul 09, 2015 5:58 am

Trans/clutch issues

Postby Hdmike444 » Sun May 26, 2019 2:34 pm

So I’m having trouble with my 226d in reverse, it has no power. What should I be checking? It won’t go up over even a 6” bump forward seems fine. What should I be checking?

winston
Volunteer Poster
Posts: 5067
Joined: Mon Feb 01, 2010 7:29 am
Location: North East Texas

Re: Trans/clutch issues

Postby winston » Mon May 27, 2019 4:58 am

The 226 repair manual trouble shooting section #2 titled "tractor does not move when power shift lever in a certain speed position" refers to main relief valve pressure being to high. Says main relief valve stuck or its pilot hole plugged, or wrong spring or shims installed. Suggested solution: check main relief valve, springs and adjusting shims.

Aaron
Site Administrator
Posts: 2964
Joined: Thu Jul 26, 2007 12:39 pm
Location: Iowa Park, TX

Re: Trans/clutch issues

Postby Aaron » Tue May 28, 2019 10:11 am

Also be sure that the shift gate is not physically preventing the shift lever from getting all of the way into the R position.


Return to “Tech Support”

Who is online

Users browsing this forum: Google [Bot] and 21 guests