1510D quick connect hitch

Post your questions or problems you are haviing with your Yanmar tractor here.

Moderator: Aaron

Volunteer Poster
Posts: 2
Joined: Mon Sep 10, 2018 10:12 pm

1510D quick connect hitch

Postby TownnCountry » Mon Sep 10, 2018 10:33 pm

Hello, Newbie here from Tampa, FL. just bought first little tractor for small food plots.
Also bought a 4' titan bush hog.
The lower arms wouldn't open wide enough to go on the bush hogs pins so I had to switch the pins around so they point inwards and the lower arms would fit onto pins.

Im wanting to buy a small (4') disc or roto tiller as well and wondering if the quick connect hitch from Harbor Freight would fit on my tractor?
If not can anyone suggest a quick connect hitch that will fit the 1510D?

Thanks in advance for y'alls help.

Volunteer Poster
Posts: 5392
Joined: Mon Feb 01, 2010 7:29 am
Location: North East Texas

Re: 1510D quick connect hitch

Postby winston » Tue Sep 11, 2018 8:52 am

I used a harbor freight on my 2002D. Only guessing it wasn't much different than your 1510D.
m_100_3994.jpg (153.03 KiB) Viewed 2485 times

Site Administrator
Posts: 3237
Joined: Thu Jul 26, 2007 12:39 pm
Location: Iowa Park, TX

Re: 1510D quick connect hitch

Postby Aaron » Tue Sep 11, 2018 10:08 am

I think it will fit the tractor just fine. It will add some length which will lower the weight capacity a little. Also be aware that not all implements are actually built to a tight standard like that. I have the Pat's quick hitch on mine which at least allows you to adjust the width and I have had to modify most of my implements (Landpride and LMC) for one reason or another to fit. The LMC box blade was the worst because it had a narrow channel for the lift arms and the quick hitch was too wide and at a slight angle. With a rigid width like the HF hitch it will be even worse. But... once you get your implements setup the first time it is super easy to change them later.



Volunteer Poster
Posts: 39
Joined: Sat May 18, 2019 1:40 pm
Location: McRae Florida

Re: 1510D quick connect hitch

Postby dagnblond » Wed Jan 22, 2020 6:03 am

I have a 1401D and tried the harbor freight hitch and it would not fit the implements at all so took it back and got the Pat's quick hitch and after a little messing with it to get it right it works great

Return to “Tech Support”

Who is online

Users browsing this forum: No registered users and 25 guests