YM2210 manual gears shift locks up rear end

Post your questions or problems you are haviing with your Yanmar tractor here.

Moderator: Aaron

Reece Electric
Volunteer Poster
Posts: 3
Joined: Sun Feb 21, 2021 7:07 am

YM2210 manual gears shift locks up rear end

Postby Reece Electric » Sun Feb 21, 2021 7:16 am

I have a YM2210 that locks up the rear end whenever I try to shift the manual shifter to one side. The other side (only two positions). Not sure about the shift pattern.

Aaron
Site Administrator
Posts: 3413
Joined: Thu Jul 26, 2007 12:39 pm
Location: Iowa Park, TX

Re: YM2210 manual gears shift locks up rear end

Postby Aaron » Mon Feb 22, 2021 9:49 am

That is typically caused by the shift fork being stuck in one gear (the shift lever slips out of the fork and leaves the gear engaged). Trying to put it into a different gear puts the transmission in a bind since you cant go two speeds at once. Does the tractor try to move when in neutral?

Reece Electric
Volunteer Poster
Posts: 3
Joined: Sun Feb 21, 2021 7:07 am

Re: YM2210 manual gears shift locks up rear end

Postby Reece Electric » Mon Feb 22, 2021 4:55 pm

It will not try to move once i get it unstuck and in neutral. What is suppose to keep shift lever engaged? It moves free between the two fork levers.

Reece Electric
Volunteer Poster
Posts: 3
Joined: Sun Feb 21, 2021 7:07 am

Re: YM2210 manual gears shift locks up rear end

Postby Reece Electric » Mon Feb 22, 2021 5:02 pm

Also. I am the parts manual. it appears that the Ball and springs that go into the fork shifters are missing. could this cause this and are they available to purchase?

winston
Volunteer Poster
Posts: 5770
Joined: Mon Feb 01, 2010 7:29 am
Location: North East Texas

Re: YM2210 manual gears shift locks up rear end

Postby winston » Mon Feb 22, 2021 6:17 pm

194310-27180--https://www.hoyetractor.com/PROD/194310-27180.htm

24190-100001--https://www.hoyetractor.com/PROD/SB-4190.htm

Yes, the spring pushes the ball into a detent to keep the lever from moving.


Return to “Tech Support”

Who is online

Users browsing this forum: No registered users and 15 guests