1610d hyd. fel. problem

Post your questions or problems you are haviing with your Yanmar tractor here.

Moderator: Aaron

Richard Flurry
Volunteer Poster
Posts: 1
Joined: Thu Aug 13, 2020 2:02 pm

1610d hyd. fel. problem

Postby Richard Flurry » Thu Aug 13, 2020 2:17 pm

1610d fel. must use 3point at different settings to get loader to raise or lower . does not have joystick. line from pump has tee for lift fluid then on to 3 point.

Aaron
Site Administrator
Posts: 3331
Joined: Thu Jul 26, 2007 12:39 pm
Location: Iowa Park, TX

Re: 1610d hyd. fel. problem

Postby Aaron » Sat Aug 15, 2020 10:34 am

You can not use a tee with an open center hydraulic system (all Yanmars & most all other brands). You have to plumb the pressure side in series or use power beyond.

winston
Volunteer Poster
Posts: 5612
Joined: Mon Feb 01, 2010 7:29 am
Location: North East Texas

Re: 1610d hyd. fel. problem

Postby winston » Sun Aug 16, 2020 4:11 am

Just a little more explanation how it should be unless you have power beyond. https://www.hoyetractor.com/loaderinstall.htm


Return to “Tech Support”

Who is online

Users browsing this forum: Bing [Bot] and 26 guests