Search found 4713 matches

by winston
Sat Dec 01, 2018 3:46 pm
Forum: Tech Support
Topic: trans mission problem ym226
Replies: 24
Views: 804

Re: trans mission problem ym226

Maybe he turned in wrong direction. Clutch would allow that.
by winston
Sat Dec 01, 2018 3:43 pm
Forum: Tech Support
Topic: 1510d front drive shaft removal
Replies: 4
Views: 116

Re: 1510d front drive shaft removal

Glad it worked out for you.
by winston
Sat Dec 01, 2018 3:41 pm
Forum: Tech Support
Topic: YM 226 cranks but wont run
Replies: 18
Views: 598

Re: YM 226 cranks but wont run

Bolting in place of the injector seems to be the instructions here. Might need a gasket under it. https://www.hoyetractor.com/PROD/CTA.htm
by winston
Fri Nov 30, 2018 6:38 pm
Forum: Tech Support
Topic: trans mission problem ym226
Replies: 24
Views: 804

Re: trans mission problem ym226

2018-11-30-062156.jpg With your last post I now agree your problem is likely in the power shift end. I would think there should be some life even though the springs are a little out of specs. The trouble shooting section of the 226 manual gives this under "tractor will not move in any gear&quo...
by winston
Thu Nov 29, 2018 3:46 pm
Forum: Tech Support
Topic: trans mission problem ym226
Replies: 24
Views: 804

Re: trans mission problem ym226

Maybe so. I am quite uncertain now just what we are calling the input shaft. "If" it were the pinion shaft that would eliminate the power shift end but if actually the input shaft coming straight off the clutch then I suppose the powershift would have to be working. I am pretty confused at...
by winston
Wed Nov 28, 2018 4:18 pm
Forum: Tech Support
Topic: trans mission problem ym226
Replies: 24
Views: 804

Re: trans mission problem ym226

It's awfully hard to troubleshoot all apart. Reassembly and try that differential lock. If a brake pinion or shaft on either side is broken that will lock it together and it will move, also, does FWD work?. Norm, he stated earlier when he had the gears apart that wheels would turn when he turned th...
by winston
Wed Nov 28, 2018 4:17 pm
Forum: Tech Support
Topic: trans mission problem ym226
Replies: 24
Views: 804

Re: trans mission problem ym226

sbgo wrote:springs measure
small diameter 2.125
large 2.515

A little under specs but I have no idea that could be your problem.
by winston
Mon Nov 26, 2018 3:49 pm
Forum: Tech Support
Topic: Yanmar 1500D Transmission Cover
Replies: 3
Views: 160

Re: Yanmar 1500D Transmission Cover

O~o\ has pretty much covered it. This attached thread by a lady gives lots of good pictures and info. viewtopic.php?f=1&t=3578
by winston
Mon Nov 26, 2018 7:30 am
Forum: New Products & New News!
Topic: Yanmar YM1600 Parts Tractor Arrived
Replies: 2
Views: 219

Re: Yanmar YM1600 Parts Tractor Arrived

I don't work for Hoye but I think you will need to hit the contact us button in order to get a price.

Your probably aware new steering parts are available. https://www.hoyetractor.com/CTGY/1600STEEREXT.htm

https://www.hoyetractor.com/CTGY/1600STEERINT.htm
by winston
Mon Nov 26, 2018 5:55 am
Forum: Tech Support
Topic: Oil pressure gauge-2210
Replies: 2
Views: 110

Re: Oil pressure gauge-2210

No advice on the gauge but you might consider this item for installation. https://www.hoyetractor.com/PROD/OGA-2.htm
I know I am in the minority but like the warning light. Much more likely to notice a red light than noticing a pressure drop on a gauge. Having both would be nice.
by winston
Mon Nov 26, 2018 5:50 am
Forum: Tech Support
Topic: YM1720D I removed the Loader and the engine won't start.
Replies: 3
Views: 137

Re: YM1720D I removed the Loader and the engine won't start.

You are dead heading your pump if the lines are disconnected and plugged. You will be fortunate if it doesn't crank and bust your pump. The two lines need to be hooked together so the fluid can circulate.
by winston
Thu Nov 22, 2018 5:35 am
Forum: Tech Support
Topic: YM 22d Noisy 3 point after I drained the hyd fluid
Replies: 4
Views: 173

Re: YM 22d Noisy 3 point after I drained the hyd fluid

https://www.hoyetractor.com/PROD/HS-4430.htm

I would advise replacement.

Sometimes a whine from the pump could be caused by high pressure and a relief valve going off. Don't suppose by chance you completely closed the stop/slow descent valve?
by winston
Wed Nov 21, 2018 5:58 am
Forum: Tech Support
Topic: YM155D smoking and leaking oil
Replies: 4
Views: 193

Re: YM155D smoking and leaking oil

Pretty sure I gave you some bad information. After looking at the part drawings for the 155 I see there is a passage for the lubricating oil to go from the block into the head so it would be possible to have an oil leak between the head and block. I can only guess the small opening at the rear of th...
by winston
Wed Nov 21, 2018 5:23 am
Forum: Tech Support
Topic: Yanmar 1401D 3 pt lift
Replies: 3
Views: 143

Re: Yanmar 1401D 3 pt lift

What happens when you put weight on it? (stand on it)

Go to advanced search