Search found 19 matches

by Jayb
Wed Mar 18, 2020 5:07 pm
Forum: Tech Support
Topic: Overheating/blowing oil out of exhaust stack
Replies: 6
Views: 1734

Re: Overheating/blowing oil out of exhaust stack

Can anyone help with a list of parts I need to order to replace the head gasket?
I need to order to the UK so buying it all in one go from the US is easier with postage costs. There isn’t any parts stockists in the UK I can find.
Thanks
by Jayb
Wed Mar 18, 2020 5:06 pm
Forum: Tech Support
Topic: 1610d new issues
Replies: 5
Views: 1539

Re: 1610d new issues

Can anyone help with a list of parts I need to order to replace the head gasket?
I need to order to the UK so buying it all in one go from the US is easier with postage costs. There isn’t any parts stockists in the UK I can find.
Thanks
by Jayb
Mon Mar 16, 2020 3:04 pm
Forum: Tech Support
Topic: Overheating/blowing oil out of exhaust stack
Replies: 6
Views: 1734

Re: Overheating/blowing oil out of exhaust stack

Mine doesn’t seem to overheat, gauge stays low, if this can be trusted? probably due to it being winter here but it pushes water up into the expansion bottle. Ok for short light duty’s but pushes it to the top of the bottle if worked harder for longer.
by Jayb
Mon Mar 16, 2020 2:58 pm
Forum: Tech Support
Topic: Overheating/blowing oil out of exhaust stack
Replies: 6
Views: 1734

Re: Overheating/blowing oil out of exhaust stack

See my 1610 issues post below yours, watch the video it sounds like we have exactly the same problem.
by Jayb
Mon Mar 16, 2020 9:14 am
Forum: Tech Support
Topic: 1610d new issues
Replies: 5
Views: 1539

Re: 1610d new issues

Yeah, black oily slobber from muffler joint.
by Jayb
Sun Mar 15, 2020 6:54 pm
Forum: Tech Support
Topic: 1610d new issues
Replies: 5
Views: 1539

1610d new issues

Finally got to use it in anger today but I’ve got a feeling the head gasket needs doing? Expansion tank water level was at midway between low and high at the start.
Starts, runs, drives fine, no smoke apart from start up and acceleration.
See video: https://m.youtube.com/watch?v=a7NBgZpXP_U
by Jayb
Sun Mar 15, 2020 4:00 pm
Forum: Tech Support
Topic: 1610d powershift noises
Replies: 11
Views: 2453

Re: 1610d powershift noises

Yeah, all works fine so I’ll use and see how it goes.
Got a few other issues but I’ll make a new post for these,
Thanks for the help.
by Jayb
Sat Mar 14, 2020 1:40 pm
Forum: Tech Support
Topic: 1610d powershift noises
Replies: 11
Views: 2453

Re: 1610d powershift noises

Ok, Had time to play with it a bit today, noise definitely seems to come from power shift/transmission area, engaging the pto makes no difference to noise, 1,2,3 or N in range makes no difference to noise, but if you leave it idle for a few minutes the noise seems so quieten down a bit?
by Jayb
Thu Mar 12, 2020 7:36 pm
Forum: Tech Support
Topic: 1610d powershift noises
Replies: 11
Views: 2453

Re: 1610d powershift noises

I just realised something, I’m confusing pressed/ depressed. Just to clarify the noise is apparent when the clutch is raised and disappears when pushed down.
by Jayb
Thu Mar 12, 2020 6:20 pm
Forum: Tech Support
Topic: 1610d powershift noises
Replies: 11
Views: 2453

Re: 1610d powershift noises

It sounds like something is spinning/turning/whirring, It’s not easy to hear on the video but it also changes the engine sound when the clutch is depressed if that makes any sense, that is more noticeable when cold. I’ll try and isolate exactly where it’s coming from but power shift and under feet a...
by Jayb
Thu Mar 12, 2020 12:51 pm
Forum: Tech Support
Topic: 1610d powershift noises
Replies: 11
Views: 2453

Re: 1610d powershift noises

No inertia brake unfortunately :(
by Jayb
Thu Mar 12, 2020 10:41 am
Forum: Tech Support
Topic: 1610d powershift noises
Replies: 11
Views: 2453

Re: 1610d powershift noises

Thanks for the reply, I’ve adjusted the clutch but this didn’t help, I’ll take a look later for a inertia brake.
by Jayb
Wed Mar 11, 2020 4:21 pm
Forum: Tech Support
Topic: 1610d powershift noises
Replies: 11
Views: 2453

1610d powershift noises

I’ve managed to pick up a 1610d recently and although it all works and runs fine but the power shift/transmission is noisy when clutch is depressed, With the power shift in neutral and range gear in any gear even neutral, Not noticeable when in use, just at standstill. sounds like the PTO is running...
by Jayb
Mon Feb 10, 2020 2:22 pm
Forum: Tech Support
Topic: 4wd front oil plug/dipstick level
Replies: 1
Views: 1928

4wd front oil plug/dipstick level

The front axle on my 1610d has a screw in bolt/dipstick system, my question is do I screw in to check/set level or check without screwing in? There seems some confusion about this online which is why I ask , I guess the old owner set it screwed in as this is the level set, if out resting on the top ...
by Jayb
Sun Feb 02, 2020 3:50 pm
Forum: Tech Support
Topic: 1610d lighting issue
Replies: 8
Views: 2832

Re: 1610d lighting issue

Solved! Ignition switch issue, I can fix by turning key 1mm back after start up :D

Go to advanced search